Electric Balloon Inflator
Continuous and push down touch model on the machine.
Switch to ON to activate continuous blowing model, two balloons at the same time.
Switch to OFF, push down model is activated for push down active model.
Please choose the right mode for different balloons. This quality electric balloon pump will inflate hundreds of decorative balloons in super-fast time and save you time and extra manual effort required to inflate them.
Cable compartment protects the wire in the machine .
The wire can be put within Cable compartment pump to avoid damages.
In stock
SKU
5037
Features:
- Two operation modes. When inflate few or several balloons, just need to press down the nozzle slightly, the micro switch turns on, motor starts up, balloon will be inflated. When inflate many balloons, choose auto continuous mode.
- Fast inflation.
- Automatic inflation & press inflation.
- It has four shockproof shims which can help absorb on the desk tightly.
- International CE and GS certification.
- The operation is simple and flexible.
- Its special nozzles make operation much easier. It starts when you press down the nozzle and stop immediately when loosen, if large number of balloons need inflating, you may turn on the button for continuous use.
- Portable design.
Model: HT-508
Operating Modes:
- Connect plug AC socket.
- Half Auto Mode: Turn on the switch to I, and cover the vent hole with the balloon, then press down vent hole slightly to inflate the balloon and loosen it to stop.
- Auto Mode: Turn on the switch to II, put the balloon on the vent hole to inflate.
Power Supply:
- US: AC110V ~ 120V, 60Hz
- EU: AC220V ~ 240V, 50Hz
Noise: <85dB
Color: White and blue
Place of Application: Balloon
Note:
- If the supply cord is damaged, it must be replaced by the manufacturer or its service agent in order to avoid a hazard.
- To reduce the risk of electric shock, do not expose to rain.
- Do not obstruct the air passage opening or insert any object into the opening at any time.
- Children should not be left unattended when using the pump. Use only under competent supervision.
- Don't let air pump work for more than 2 hours at a time, take 15 minutes break between uses, as overheating may occur and pump will automatically shut off. It will be ready to use after it has cooled down.
Product Weight: 1492 G / 52.63 Ounces
Product Dimensions (L*W*H): 205*170*140 MM / 8.07*6.69*5.51 Inches
Package Weight: 1580.0 G / 55.73 Ounces
Package Dimensions (L*W*H): 225*188*155 MM / 8.86*7.40*6.10 Inches
Write Your Own Review
